If you cannot find a stock ignition wire set with the specifications that you require from our product selection, this CUSTOM Ignition Wire Guide will give you the opportunity to order a custom ignition wire set.
We offer multiple options for both the coil and spark plug ends. Please add the clocking information if you are using two 90° boots on a wire.
NOTE: Due to EMI (electromagnetic interference), our ignition wires can only be produced with the maximum length of 24" of braiding. The clear diaelectric coating over the braid will contain the EMI without a grounding strap up to that length. Wires longer than 24" will have the braiding removed from one end to prevent any possible issues related to EMI. Also, be aware that the shortest wire length that we can build is 6".
Please note that any custom ignition wire set cannot be returned unless for a cut down or for a warranty issue.
Please verify your requested specifications before submitting your order. You can also view the order information a 2nd time in the checkout process.
**Please select the ignition wire option in the Model column below to
pull up the Custom Guide information for the ignition wire sets.
You can find your "stock" brake information in our "Search-by-Bike"area and then come back to this page and find the necessary guide.