Hidden nylon inserts and cable liners act as bearing surfaces along the entire length of the cable to provide 1,000,000+ cycles of smotth reliable drag-free operation.
Polished Chrome and Stainless Steel fittings.
Factory pre-lubricated with PTFE lubricant.
Fits early-style S and S E or S and S G series carbs.
I am not finding what I need in the stock and "alternative stock" lines. I would like to order a custom cable.
If you need a stock or alternative housing length idle cable, that is not listed in the selection immediately below, please select YES. Otherwise, select NO.
yes no
Are you planning on changing the travel length on your idle cable from the stock travel length, and do not see any selection below for your application, select the YES box. Otherwise select NO.
yes no
Are you going to change the stock bent tube adjuster assembly on your idle cable, and do not see any selection below for your application, please select YES. Note: Available options are 90, 70, and 45 degree angles, in smooth ('96 or newer) and threaded ('95 and older) fittings. Otherwise, select NO.
yes no
Note: You can sort the information below by selecting the column heading.
