To help you determine if you will require a custom application for your cables or brake lines, select the "Do I Need A Custom Cable or Brake Line?" button in the beginning of each product area. A list of cable-specific questions will appear for you to answer. Ansewring YES to any question will direct you to that product's Product Page to look at EVERY different length control cable or brake line that we manufacture, in the hopes that you will find what you are looking for without needing to order a custom cable or brake line. Skipping the questions will allow you to continue to shop in "Search by Bike".
Note: If you have questions regarding alternative stock cables or brake lines, please go to the top Navigation Bar, find Custom Size Ordering, and select Step #1 for a detailed explanaton.
If you need a stock or alternative housing length clutch cable, that is not listed in the selection immediately below, please select YES. Otherwise, select NO.
yes no
Are you planning on changing the travel length on your one-piece or two-piece clutch cable from the stock travel length, and do not see any selection below for your application, select the YES box. Otherwise select NO.
yes no
Do you need to change the adjuster location from the original stock position on your 2-piece clutch cable? If you do, please select YES. Otherwise, select NO.
If you need a stock or alternative housing length throttle cable, that is not listed in the selection immediately below, please select YES. Otherwise, select NO.
yes no
Are you planning on changing the travel length on your throttle cable from the stock travel length, and do not see any selection below for your application, select the YES box. Otherwise select NO.
yes no
Are you going to change the stock bent tube adjuster assembly on your throttle cable, and do not see any selection below for your application, please select YES. Note: Available options are 90, 70, and 45 degree angles, in smooth - 96 or newer and threaded - 95 and older fittings. Otherwise, select NO.
yes no
Length
Part No.
Housing Length
Travel Length
Color
Tube Bend
End Style
US Dollars
Buy Now
Stock
30 3/4"
5"
90°
SMOOTH
$55.95
- 2"
28 1/2"
5"
90°
SMOOTH
$57.95
+ 2"
32 3/4"
5"
90°
SMOOTH
$57.95
+ 3"
34"
5"
90°
SMOOTH
$57.95
+ 4"
34 3/4"
5"
90°
SMOOTH
$57.95
+ 6"
36 5/8"
5"
90°
SMOOTH
$57.95
+ 8"
38 3/4"
5"
90°
SMOOTH
$57.95
+ 10"
40 1/2"
5"
90°
SMOOTH
$57.95
+ 12"
42 1/2"
5"
90°
SMOOTH
$57.95
Idle or Idle-Cruise Cables for 2007 FLSTF(I) Fat Boy
If you need a stock or alternative housing length idle or idle-cruise cable, that is not listed in the selection immediately below, please select YES. Otherwise, select NO.
yes no
Are you planning on changing the travel length on your idle or idle-cruise cable from the stock travel length, and do not see any selection below for your application, select the YES box. Otherwise select NO.
yes no
Are you going to change the stock bent tube adjuster assembly on your idle or idle-cruise cable, and do not see any selection below for your application, please select YES. Note: Available options are 90, 70, and 45 degree angles, in smooth 96 or newer, and threaded 95 and older fittings. Otherwise, select NO.
yes no
Do you need a tail piece on your idle-cruise cable that is not stock for your application, and do not see any selection below for your application, select YES. Otherwise, select NO.
yes no
Length
Part No.
Housing Length
Travel Length
Color
Tube Bend
End Style
US Dollars
Buy Now
Stock
30 3/4"
4 3/4"
90°
SMOOTH
$55.95
- 2"
28 1/2"
4 3/4"
90°
SMOOTH
$57.95
+ 2"
32 3/4"
4 3/4"
90°
SMOOTH
$57.95
+ 3"
33 11/16"
4 3/4"
90°
SMOOTH
$57.95
+ 4"
34 3/4"
4 3/4"
90°
SMOOTH
$57.95
+ 6"
36 5/8"
4 3/4"
90°
SMOOTH
$57.95
+ 8"
38 3/4"
4 3/4"
90°
SMOOTH
$57.95
+ 10"
40 3/4"
4 3/4"
90°
SMOOTH
$58.95
+ 12"
42 1/2"
4 3/4"
90°
SMOOTH
$57.95
ABS Lower Designer Series Brake Assembly for 2007 FLSTF(I) Fat Boy
If you need a stock or alternative housing length Designer Series Upper Brake Assembly, that is not listed in the selection immediately below, please select YES. Otherwise, select NO.
yes no
Do you need banjo angles or a bore/bolt size that is different than your stock fitment, and do not see any selection below for your application, please select YES. Otherwise, select NO.
yes no
Designer Lower Brake Assembly for 2007 FLSTF(I) Fat Boy
If you need a stock or alternative housing length Designer Series Upper Brake Assembly, that is not listed in the selection immediately below, please select YES. Otherwise, select NO.
yes no
Do you need banjo angles or a bore/bolt size that is different than your stock fitment, and do not see any selection below for your application, please select YES. Otherwise, select NO.
If you need a stock or alternative housing length Swivel-Fit Front Brake Line, that is not listed in the selection immediately below, please select YES. Otherwise, select NO.
yes no
Do you need banjo angles or a bore/bolt size that is different than your stock fitment, and do not see any selection below for your application, please select YES. Otherwise, select NO.
If you need a stock or alternative housing length Singel Disc Front Brake Line, that is not listed in the selection immediately below, please select YES. Otherwise, select NO.
yes no
Do you need banjo angles or a bore/bolt size that is different than your stock fitment, and do not see any selection below for your application, please select YES. Otherwise, select NO.
yes no
Single Disc Front Brake Lines require clocking to avoid braided line routing kinks and twists when assemblying. If you are planning on purchasing a Single Disc Front Brake line, you will be required to chose one of the clocking positions that are offered. If you believe your clocking requirement will be different from your current fitment, you may opt to change the clocking angle. If so, select YES. Otherwise, select NO.
If you need a stock or alternative housing length Rear Brake Line, that is not listed in the selection immediately below, please select YES. Otherwise, select NO.
yes no
Do you need banjo angles or a bore/bolt size that is different than your stock fitment, and do not see any selection below for your application, please select YES. Otherwise, select NO.
Are you planning on ordering a set of ignition wires that has specifications other than the stock application for your year and make of bike? This includes changing the wire length, the boot clocking, or the coil and spark plug boots. If you are, please select YES. If you are not planning on changing your ignition wire set and wish to order a stock set, please select NO.
